Vaisala PTU200 Series Guida Utente Scaricare il pdf (Pagina 48)

USER'S GUIDE_______________________________________________________________________

44 ___________________________________________________________________ M210195EN-A

Diagnostic commands

The PTU200 series digital transmitters respond to a set of diagnostic

commands, which are useful for analyzing the basic settings and

general operation of the transmitters. The diagnostic commands are

listed in

TABLE 7-2 Diagnostic commands

Function Command

basic information on settings ?

software version VERS

serial number SNUM

outputting error messages ERRS

? Basic information on the transmitter settings

? <cr>

The ? command lists the basic information of the transmitter.

Software version PTU200 / 1.02

Serial number T5030004

Configuration 12

Linear adjustments ON

Multipoint adjustments ON

Calibration date 1999-03-12

Baud Parity Data Stop Dpx 9600 E 7 1 F

Echo ON

Sending mode STOP

Address 0

Output interval 3 s

Output format 4.1P""UUU""2.1RH""UUU#r#n

Error output format

SCOM format

Pressure unit hPa

Temperature unit 'C

Transducer 1:

TYPE: PMT

Transducer 2:

TYPE: VMT

Transducer 3:

TYPE: NONE

NOTE

Use this command only for one transmitter at a time. Any PTU200

series transmitter will always respond to ?-command whatever its

settings are, provided that the serial interface settings are correct.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Nessun commento

Vaisala PTU200 Series Guida Utente Pagina 48