Vaisala WINDCAP WS425 Guida Utente Scaricare il pdf (Pagina 116)

User's Guide ______________________________________________________________________

Example:

In this example the averaging time is shown to be 4 seconds.

G wndAvg

s wndAvg ,3.00000

BAUD — Display or Set Port Settings

This command shows or changes values of the serial port settings.

Set Port Settings

You can use the BAUD command to change the bit rate, parity

bit, data bits, stop bit, and communication profile of the selected

serial port. To restore default serial port settings, see Restoring

Serial Port Settings on page 186.

NOTE

There is a 100

-millisecond delay after which WMT700 takes the settings

into use. Do not send commands to WMT700 during this time.

BAUD x,y,z,w

where

Bit rate (300, 1200, 2400, 4800, 9600, 19200, 38400,

57600, or 115200)

Data bits (7 or 8)

Parity (n = none, e = even, o = odd)

Stop bits (1 or 2)

Example:

In this example the bit rate is set to 115200, data bits to 8, parity

to none, and stop bits to 1.

BAUD 115200,8,n,1

Display Port Settings

You can use the BAUD command to display the current serial

port settings.

BAUD

114 __________________________________________________________________ M211095EN-E

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 220 221

Nessun commento

Vaisala WINDCAP WS425 Guida Utente Pagina 116