Vaisala HUMICAP HMP46 Guida Utente Scaricare il pdf (Pagina 22)

HMI41 AND PROBES

Operating Manual M210316EN-A

set

°C

The blinking number indicates the value of the lower temperature reference

stored in the HMI41 memory. Insert the probe to the lower reference

temperature. Check the reference temperature and change the display with

buttons ▲ and ▼ to correspond to the accurate value, for example:

set

°C

Press ENTER and the HMI41 shows the value that the probe is currently

measuring, displaying a message similar to the following:

°C

Wait at least ten minutes for the reading to stabilize and press ENTER to

acknowledge the value. Press ENTER again to conclude the lower point

calibration. A message similar to the following appears with the first line

blinking:

set

°C

The blinking number indicates the value of the higher temperature reference

stored in the HMI41 memory. Insert the probe to the higher reference

temperature. Check the reference temperature and change the display with

buttons ▲ and ▼ to correspond to the accurate value, for example:

set

°C

Press ENTER and the HMI41 shows the value that the probe is currently

measuring, displaying a message similar to the following:

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Nessun commento

Vaisala HUMICAP HMP46 Guida Utente Pagina 22